- Navigation
Results 1 to 10 of 14
Thread: Chassis measurements
-
12-03-2019, 11:20 PM #1
The Nitrous Outlet Junkie
- Status
- Offline
- Join Date
- Apr 2010
- Name
- Troy
- Vehicle
- 1994 Firebird Formula
- Location
- moore, ok (south okc)
- Posts
- 3,274
Chassis measurements
Does anybody happen to know where I can find a list of measurements in the chassis I'm wanting to check and see if my car is still square and straight before I weld in my roll cage and subframe connectors.
94 Formula "budget build" #thebeaterbird
10.177 @128.31 on a lil 250 shot
350, LT1, carb, LE grind cam, th400, 4k stall, ford 8.8 w/ 4.10s
-
The Following User Says Thank You to zooguy For This Post:
-
12-03-2019, 11:41 PM #2
LTx Guru
- Status
- Offline
- Join Date
- Apr 2013
- Name
- Fred
- Vehicle
- 1994 Formula - SOLD
- Location
- Central NJ
- Posts
- 2,283
1994 factory service manual. Section 11, detailed diagrams starting on page 11-30.
Free download from a GaryDoug:
https://www.mediafire.com/?40mfgeoe4cttiSOLD - GONE TO A (VERY) GOOD HOME ! - 94 Formula A3+1: 381ci forged stroker - Callies Stealth, Oliver 5.85 billet rods, BME nitrous pistons / CNC LT4 heads / CC solid roller / TH400+GearVendors OD / 4.11 Strange 12-bolt / 300-shot N2O / Spohn Suspension / roll bar / MoTeC M48 Pro engine management system /a few other odds 'n ends.
-
12-04-2019, 01:28 PM #3
Xtreme Member
- Status
- Offline
- Join Date
- Nov 2012
- Name
- Shaun
- Vehicle
- 1994 Formula
- Location
- Phillipsburg NJ
- Posts
- 7,266
Supporting Member
your car? probably not straight in the slightest
Originally Posted by zooguy
Sent from my SM-G975U using Tapatalk2021 Charger Scat 392
1994 Firebird Formula 381 stroker - Carrying the torch! - 9.90 @ 134.3mph on a 200 shot
The wrench/driver for LTConvert's 94 Z28- Ellwein 383/LE Trickflows/ D1SC / CPT Ultra Pro Race 4L60E
10.78 @ 125mph. Shooting for 9.99 for Frank Cahall!
-
The Following User Says Thank You to SSlowBoat For This Post:
-
12-04-2019, 02:51 PM #4
The Nitrous Outlet Junkie
- Status
- Offline
- Join Date
- Apr 2010
- Name
- Troy
- Vehicle
- 1994 Firebird Formula
- Location
- moore, ok (south okc)
- Posts
- 3,274
I know right ... these pictures are from the 24th of November whenever I set my new personal best of a 10.17 and a 1.333 60-foot time Originally Posted by SSlowBoat
Sent from my SM-N950U using Tapatalk94 Formula "budget build" #thebeaterbird
10.177 @128.31 on a lil 250 shot
350, LT1, carb, LE grind cam, th400, 4k stall, ford 8.8 w/ 4.10s
-
12-04-2019, 02:54 PM #5
Xtreme Member
- Status
- Offline
- Join Date
- Nov 2012
- Name
- Shaun
- Vehicle
- 1994 Formula
- Location
- Phillipsburg NJ
- Posts
- 7,266
Supporting Member
Didnt you cut a hole in your firewall to access bellhousing bolts? Originally Posted by zooguy
I know right ... these pictures are from the 24th of November whenever I set my new personal best of a 10.17 and a 1.333 60-foot time
Sent from my SM-N950U using Tapatalk
Sent from my SM-G975U using Tapatalk2021 Charger Scat 392
1994 Firebird Formula 381 stroker - Carrying the torch! - 9.90 @ 134.3mph on a 200 shot
The wrench/driver for LTConvert's 94 Z28- Ellwein 383/LE Trickflows/ D1SC / CPT Ultra Pro Race 4L60E
10.78 @ 125mph. Shooting for 9.99 for Frank Cahall!
-
The Following User Says Thank You to SSlowBoat For This Post:
-
12-05-2019, 06:57 PM #6
The Nitrous Outlet Junkie
- Status
- Offline
- Join Date
- Apr 2010
- Name
- Troy
- Vehicle
- 1994 Firebird Formula
- Location
- moore, ok (south okc)
- Posts
- 3,274
Not in the firewall but more so like the trans tunnel
Sent from my SM-N950U using Tapatalk94 Formula "budget build" #thebeaterbird
10.177 @128.31 on a lil 250 shot
350, LT1, carb, LE grind cam, th400, 4k stall, ford 8.8 w/ 4.10s
-
12-05-2019, 07:02 PM #7
The Nitrous Outlet Junkie
- Status
- Offline
- Join Date
- Apr 2010
- Name
- Troy
- Vehicle
- 1994 Firebird Formula
- Location
- moore, ok (south okc)
- Posts
- 3,274
#thebeaterbird
Sent from my SM-N950U using Tapatalk94 Formula "budget build" #thebeaterbird
10.177 @128.31 on a lil 250 shot
350, LT1, carb, LE grind cam, th400, 4k stall, ford 8.8 w/ 4.10s
-
12-06-2019, 09:18 AM #8
Xtreme Member
- Status
- Offline
- Join Date
- Nov 2012
- Name
- Shaun
- Vehicle
- 1994 Formula
- Location
- Phillipsburg NJ
- Posts
- 7,266
Supporting Member
and youre worried about the car being "straight?". Originally Posted by zooguy
#thebeaterbird
Sent from my SM-N950U using Tapatalk2021 Charger Scat 392
1994 Firebird Formula 381 stroker - Carrying the torch! - 9.90 @ 134.3mph on a 200 shot
The wrench/driver for LTConvert's 94 Z28- Ellwein 383/LE Trickflows/ D1SC / CPT Ultra Pro Race 4L60E
10.78 @ 125mph. Shooting for 9.99 for Frank Cahall!
-
The Following User Says Thank You to SSlowBoat For This Post:
-
12-06-2019, 10:45 AM #9
The Nitrous Outlet Junkie
- Status
- Offline
- Join Date
- Apr 2010
- Name
- Troy
- Vehicle
- 1994 Firebird Formula
- Location
- moore, ok (south okc)
- Posts
- 3,274
I don't want to reinforce a twisted chassis
Sent from my SM-N950U using Tapatalk94 Formula "budget build" #thebeaterbird
10.177 @128.31 on a lil 250 shot
350, LT1, carb, LE grind cam, th400, 4k stall, ford 8.8 w/ 4.10s
-
12-06-2019, 02:39 PM #10
Xtreme Member
- Status
- Offline
- Join Date
- Nov 2012
- Name
- Shaun
- Vehicle
- 1994 Formula
- Location
- Phillipsburg NJ
- Posts
- 7,266
Supporting Member
then you should probably be looking for another shell, since these cars "twisted" with stock hp levels, and no holes cut in them... Originally Posted by zooguy
2021 Charger Scat 392
1994 Firebird Formula 381 stroker - Carrying the torch! - 9.90 @ 134.3mph on a 200 shot
The wrench/driver for LTConvert's 94 Z28- Ellwein 383/LE Trickflows/ D1SC / CPT Ultra Pro Race 4L60E
10.78 @ 125mph. Shooting for 9.99 for Frank Cahall!
Reply With Quote
Bookmarks