Become a ltxtech.com member, Click here to register!
BP-Automotive

Results 1 to 5 of 5
  1. #1

    Default Who would like to help out with my shifting issue?

    Well I haven't had time for tuning since the last years group drag racing at Great Lakes Dragaway, but now our group is doing another race Next Sunday and I just want to see if anybody could take a look at my bin.file and adjust it.

    Last year I ran a 13.1 on DR's on a 90*+ day and sunny. I have been having this on going issue of banging off the rev limiter before the shifting going from 2>3. I haven't even came close to to reducing this issue at the track.

    So the rear tire I am running is a 26x11.50-16LT. My transmission is a A4 of course and the stall is a YankSS3600 and it is a 3:23 rear-end.

    Thanks in advance.
    -Josh
    If my job doesn't kill me, my car will...


  2. #2
    Xtreme Member


    Status
    Offline
    Join Date
    Nov 2012
    Name
    Shaun
    Vehicle
    1994 Formula
    Location
    Phillipsburg NJ
    Posts
    7,249
    Supporting Member

    Default

    Quote Originally Posted by Firefighter Z View Post
    Well I haven't had time for tuning since the last years group drag racing at Great Lakes Dragaway, but now our group is doing another race Next Sunday and I just want to see if anybody could take a look at my bin.file and adjust it.

    Last year I ran a 13.1 on DR's on a 90*+ day and sunny. I have been having this on going issue of banging off the rev limiter before the shifting going from 2>3. I haven't even came close to to reducing this issue at the track.

    So the rear tire I am running is a 26x11.50-16LT. My transmission is a A4 of course and the stall is a YankSS3600 and it is a 3:23 rear-end.

    Thanks in advance.
    lower the mph on the 2-3 and make it solely rpm dependant, then lower rpm to 5500 and see if it shifts. if it doesnt, start looking into a built trans

    Sent from my SM-N950U using Tapatalk
    2021 Charger Scat 392
    1994 Firebird Formula 381 stroker - Carrying the torch! - 9.90 @ 134.3mph on a 200 shot

    The wrench/driver for LTConvert's 94 Z28- Ellwein 383/LE Trickflows/ D1SC / CPT Ultra Pro Race 4L60E
    10.78 @ 125mph. Shooting for 9.99 for Frank Cahall!

  3. #3

    Default

    So this is what I have, I started with this and subtract 2mph from each and made seperate tunes for a total of -6mph :
    1>2-----2>3-------3>4-------2>1------3>2------4>3
    36.00---72.00-----118.00----21.00----67.00----112.00

    (Hope this works)

    The I changed this: To this:
    5344.00 >>>>>>>>>> 5500
    5440.00 >>>>>>>>>> 5500
    5344.00 >>>>>>>>>> 5500

    If anyone else has input, please share. I will be showing my results next Sunday.
    Last edited by Firefighter Z; 07-22-2018 at 12:37 PM.
    -Josh
    If my job doesn't kill me, my car will...


  4. #4
    Lurker


    Status
    Offline
    Join Date
    Mar 2018
    Name
    Justin
    Vehicle
    97 Trans Am
    Location
    Tx/La
    Posts
    16

    Default

    Just drop rpm a lot earlier then you want and see when t commands a shift vs actually shifts and raise shift rpm back up until you get desired shift rpm. Alot of the times they can shift a few hundred rpm after commanded.

  5. The Following User Says Thank You to Jcvititow For This Post:


  6. #5
    Xtreme Member


    Status
    Offline
    Join Date
    Nov 2012
    Name
    Shaun
    Vehicle
    1994 Formula
    Location
    Phillipsburg NJ
    Posts
    7,249
    Supporting Member

    Default

    Quote Originally Posted by Firefighter Z View Post
    So this is what I have, I started with this and subtract 2mph from each and made seperate tunes for a total of -6mph :
    1>2-----2>3-------3>4-------2>1------3>2------4>3
    36.00---72.00-----118.00----21.00----67.00----112.00

    (Hope this works)

    The I changed this: To this:
    5344.00 >>>>>>>>>> 5500
    5440.00 >>>>>>>>>> 5500
    5344.00 >>>>>>>>>> 5500

    If anyone else has input, please share. I will be showing my results next Sunday.
    Oh, I figured u had it set HIGHER than 5500. Drop it down to 5000 then watch when it actually shifts on log, or raise your limiter.

    if you have it set for 5500 and your rev limit is 6500 and its hitting the limiter, I'd worry about your trans.

    Sent from my SM-N950U using Tapatalk
    2021 Charger Scat 392
    1994 Firebird Formula 381 stroker - Carrying the torch! - 9.90 @ 134.3mph on a 200 shot

    The wrench/driver for LTConvert's 94 Z28- Ellwein 383/LE Trickflows/ D1SC / CPT Ultra Pro Race 4L60E
    10.78 @ 125mph. Shooting for 9.99 for Frank Cahall!

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •