Become a ltxtech.com member, Click here to register!
SSS

Results 1 to 1 of 1
  1. #1
    Lurker


    Status
    Offline
    Join Date
    Nov 2010
    Vehicle
    94' Z28
    Location
    Yonkers NY
    Posts
    238

    Default 94 Camaro Project

    For sale is a long term project that I've recently lost all time and funding towards. I crashed my 94' Z28 3 years ago and bought this car to swap everything out for. The LT1 is shot and Im keeping the T56 for now. I would like to try and sell this as a complete of a car as possible before parting it out.

    What it is.
    The Car1994 V6 Auto Hardtop
    Starts and Drives but is not road worthy. It runs rough and has a bad brake line in the front.Dark Green Gray Metallic
    106k miles
    Clear coat peeling on roof and top of doors
    Ebony Interior - Door panels are not installed but included (swapped)
    C5 Wagon Wheel's (I have 3 17's with matching tires and 6-18's)
    One rust hole in the floor rear, driver foot well
    Need's brake and fuel lines

    What it will include.
    The Parts
    Most part's have roughly 15k miles unless noted

    Currently Installed
    Ford 8.8 w/ 31 spline axles & Torsen diff, stock bolt pattern axles and width
    UMI adjustable Torque arm
    UMI adjustable lower control arms (roto-joint)
    UMI Adjustable Panhard bar
    Koni 4/4 on car adjustable shocks (Rear only)
    BMR lowering springs (Rear only)
    BMR Anti sway bar (Rear only)

    Not Installed
    Koni shocks, Sprins, Sway bar (Front)
    C5 corvette brakes on BMR brackets and spindles
    UMI K-member for LT1 (BNIB)
    upper and lower control arms with poly bushings
    LT1 Coolant fans (some tabs are broken)
    Lt1/t56 engine bay wiring harness
    Walbro 255 intake fuel pump and sender
    Sparco Torino 2 Black cloth seats (both sides)
    Battery relocation kit


    Other Parts
    LT1 And LS1 power steering rack's and knuckles
    Spare rear hatch (White)
    Rear bumper (white)
    Windshield wiper motor and Arms
    2 doors (L&R) with good glass, recently new components (motors, handles, regulator) (White)
    LT1 alternator
    Steering column
    Extra ecu, coils for the V6


    There are probably other part's that I can recall right now. This would make a good project for anyone that would like to finish the car. Throw in a LTx or a LSx and keep it auto and go.

    Price $2700
    Car & Parts located in Lower Westchester County NY.
    I can grab more picture's if anyone would like.







    photo_2018-06-27_22-36-59.jpgphoto_2018-06-27_22-37-00 (2).jpgphoto_2018-06-27_22-37-00 (3).jpgphoto_2018-06-27_22-37-00 (4).jpgphoto_2018-06-27_22-37-00 (5).jpgphoto_2018-06-27_22-37-00 (6).jpgphoto_2018-06-27_22-37-00.jpgphoto_2018-06-27_22-37-01.jpg
    Last edited by Soxxpuppet; 06-27-2018 at 10:35 PM.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •