- Navigation
Results 1 to 3 of 3
Thread: Procharger P1SC
-
06-12-2018, 10:13 AM #1LTX Regular
- Status
- Offline
- Join Date
- Jan 2009
- Vehicle
- 1997 Camaro SS, 1996 Camaro Z28
- Location
- Rochester, NY
- Posts
- 227
Procharger P1SC
Procharger P1SC setup for LT1 F-body. This is a complete kit with less than 5k miles on it. Very nice condition.
-P1SC head unit
-All piping
-8" crank pulley w/spacer
-Procharger intercooler (standard version, not the duals)
-FMU
-3.8" pulley mounted on blower currently
-4.25" pulley (brand new)
-(2) 8-rib belts (one brand new)
-Tensioner
-Standoffs w/hardware
-Main mounting bracket
-Molded Procharger inlet tube (not the dryer hose)
-Large upgraded filter
-(2) bottles of Procharger oil
This was used on a stock LT1 making 8psi. The blower was never pushed.
I also have a set of 8 Trickflow 89044 injectors (44#) that was used with this setup.
$2700 for complete blower setup, $2850 including injectors.
-
07-02-2018, 10:04 PM #2LTX Regular
- Status
- Offline
- Join Date
- Jan 2009
- Vehicle
- 1997 Camaro SS, 1996 Camaro Z28
- Location
- Rochester, NY
- Posts
- 227
Lowered to $2400. Very clean, low mileage setup!
-
07-15-2018, 06:15 PM #3LTX Regular
- Status
- Offline
- Join Date
- Jan 2009
- Vehicle
- 1997 Camaro SS, 1996 Camaro Z28
- Location
- Rochester, NY
- Posts
- 227
SOLD
Bookmarks