- Navigation
Results 1 to 6 of 6
Thread: AIP OPTI
-
03-30-2018, 01:28 PM #1LTX Master
- Status
- Offline
- Join Date
- Jun 2013
- Name
- Beaver
- Vehicle
- 1994 camaro Z28
- Location
- KENTUCKY
- Posts
- 600
AIP OPTI
Has anybody trued the AIP opti
Sent from my SM-G930R6 using TapatalkBEAVER
94 Z28,4A,LLOYD SG CAM,1.6RR,SHIFT KIT,2,800 STALL,HEADERS,HEADS PORTED & POLISHED,ALL INTERNAL ENGINE PARTS LUNATI !!!
-
03-31-2018, 06:38 AM #2Xtreme Member
- Status
- Offline
- Join Date
- Nov 2012
- Name
- Shaun
- Vehicle
- 1994 Formula
- Location
- Phillipsburg NJ
- Posts
- 7,269
Supporting Member2021 Charger Scat 392
1994 Firebird Formula 381 stroker - Carrying the torch! - 9.90 @ 134.3mph on a 200 shot
The wrench/driver for LTConvert's 94 Z28- Ellwein 383/LE Trickflows/ D1SC / CPT Ultra Pro Race 4L60E
10.78 @ 125mph. Shooting for 9.99 for Frank Cahall!
-
03-31-2018, 08:12 AM #3LTX Master
- Status
- Offline
- Join Date
- Jun 2013
- Name
- Beaver
- Vehicle
- 1994 camaro Z28
- Location
- KENTUCKY
- Posts
- 600
No they have some for $300 some for $138.i might try one
Sent from my SM-G930R6 using TapatalkBEAVER
94 Z28,4A,LLOYD SG CAM,1.6RR,SHIFT KIT,2,800 STALL,HEADERS,HEADS PORTED & POLISHED,ALL INTERNAL ENGINE PARTS LUNATI !!!
-
03-31-2018, 11:38 AM #4LTx Guru
- Status
- Offline
- Join Date
- Apr 2013
- Name
- Fred
- Vehicle
- 1994 Formula - SOLD
- Location
- Central NJ
- Posts
- 2,283
AIP is "All Ignition Products". They must have changed the name because of their earlier poor reputation. I haven't heard about their products in at least five years, but prior to that, didn't matter how much you paid for it, it was not good. The $100 one is the same product that Sac City Corvette resells for $160.
Not saying they ALL fail.... just pointing out this vendor had a high failure rate 5 years ago. Some people get lucky.SOLD - GONE TO A (VERY) GOOD HOME ! - 94 Formula A3+1: 381ci forged stroker - Callies Stealth, Oliver 5.85 billet rods, BME nitrous pistons / CNC LT4 heads / CC solid roller / TH400+GearVendors OD / 4.11 Strange 12-bolt / 300-shot N2O / Spohn Suspension / roll bar / MoTeC M48 Pro engine management system /a few other odds 'n ends.
-
03-31-2018, 11:47 AM #5LTX Master
- Status
- Offline
- Join Date
- Jun 2013
- Name
- Beaver
- Vehicle
- 1994 camaro Z28
- Location
- KENTUCKY
- Posts
- 600
Sounds about right, there all cheap ones
Sent from my SM-G930R6 using TapatalkBEAVER
94 Z28,4A,LLOYD SG CAM,1.6RR,SHIFT KIT,2,800 STALL,HEADERS,HEADS PORTED & POLISHED,ALL INTERNAL ENGINE PARTS LUNATI !!!
-
03-31-2018, 02:32 PM #6
The ac delco remanufactured one I recently bought came with a Mitsubishi sensor fyi
1992 Corvette A4: Long Tubes, duals with circle track mufflers, cut lid, 17x9.5/17x11 deep dish ZR1's on 275 Nitto 555 front, 315 Nitto 555 rears, Performabuilt level 2 700R4 w/ FTI 3200 Stall, PCM For Less tune, C5 Brake Swap, more to come....
Bookmarks