- Navigation
Results 1 to 6 of 6
Thread: No Communication
-
03-28-2018, 07:03 PM #1
LTX Member
- Status
- Offline
- Join Date
- Oct 2014
- Name
- Justin
- Vehicle
- 1995 Formula
- Location
- Houston, TX
- Posts
- 82
No Communication
I noticed my car running funny today. Popping and running rough under load. I hooked up my laptop and tried to use datamaster to diagnose the issue but it won't connect. When I do a test, it shows there's a pcm present but that's about the extent of the communications. Already tried cleaning out the connector. Any ideas?
95 Cyber Grey Formula
396 M6
LE 244/252 .636/.636 110
LE 215cc Trickflows
-
03-29-2018, 07:42 AM #2
LTXTech Sponsor
- Status
- Offline
- Join Date
- Sep 2009
- Posts
- 770
way back if the fuse for the cigarette was blown it would not let you communicate with the PCM, check that.
-
03-29-2018, 04:39 PM #3
LTX Member
- Status
- Offline
- Join Date
- Oct 2014
- Name
- Justin
- Vehicle
- 1995 Formula
- Location
- Houston, TX
- Posts
- 82
I found it. The nuts on the junction box were loose.
-
04-01-2018, 08:04 PM #4
LTX Member
- Status
- Offline
- Join Date
- Oct 2014
- Name
- Justin
- Vehicle
- 1995 Formula
- Location
- Houston, TX
- Posts
- 82
It came back. Tried swapping the pcm. Nothing changed
-
04-03-2018, 06:16 AM #5
LTXTech Sponsor
- Status
- Offline
- Join Date
- Sep 2009
- Posts
- 770
have you checked the pinout on the aldl connector to make sure you have power and ground?
Originally Posted by ElkySS
-
04-04-2018, 07:42 PM #6
LTX Member
- Status
- Offline
- Join Date
- Oct 2014
- Name
- Justin
- Vehicle
- 1995 Formula
- Location
- Houston, TX
- Posts
- 82
Turns out me cable is fucked up. You can wigle it on the usb side and it looses connection
Reply With Quote
Bookmarks