- Navigation
Results 1 to 10 of 36
Thread: 396 LT1 NA dyno results
-
02-11-2018, 02:41 PM #1
396 LT1 NA dyno results
So after all the blood sweat and tears, the car finally made some decent numbers.
heres the link let me know what you guys think.Last edited by Sergiodpk; 02-15-2018 at 09:40 AM.
-
02-11-2018, 03:28 PM #2
480rwhp is pretty solid what's the setup? Hydraulic roller or solid? Heads?
1994 Trans Am GT - HPS Ported Heads/Intake, LE Cam, FTI 3600, TP Built 4L60e, Moser 9" w/ 3.90's, BMR Suspension, Formato Tuned
-
02-11-2018, 04:29 PM #3
396 stroker
AI custom Hyd roller cam
AFR 210s
10.5 compression
Factory intake manifold ported
24x torqhead swap
6speed
A/C power steering
Runs on Cali 91 piss
-
02-11-2018, 06:11 PM #4LTX Member
- Status
- Offline
- Join Date
- Oct 2014
- Name
- Justin
- Vehicle
- 1995 Formula
- Location
- Houston, TX
- Posts
- 82
Why only 10.5?
95 Cyber Grey Formula
396 M6
LE 244/252 .636/.636 110
LE 215cc Trickflows
-
02-11-2018, 06:53 PM #5
I first built the short block with the intentions of adding boost. Buuut life happens, you start popping out kids and the cash just isn’t there anymore. So you do what you can do, within the budget, to get decent compression and just go from there. Not to mention, pump gas is horrific out here in Cali. But even with compression on the lower end of the NA scale, I still think the motor performs very well. I can add plenty of timing without knocking.
-
02-11-2018, 07:36 PM #6
Are those out of the box Afr 210s? If so race ready or competition port?
1994 Trans Am GT - HPS Ported Heads/Intake, LE Cam, FTI 3600, TP Built 4L60e, Moser 9" w/ 3.90's, BMR Suspension, Formato Tuned
-
02-11-2018, 07:47 PM #7
They’re actually the older model AFR 1057s. But they’ve had light port work.
-
02-11-2018, 08:51 PM #8LTX Master
- Status
- Offline
- Join Date
- Aug 2013
- Name
- JB
- Vehicle
- 1994 Camaro Z28 1996 Camaro SS
- Location
- Atoka,TN
- Posts
- 531
I have a similar setup but never dyno'd. I would love to make those numbers.
Sent from my SAMSUNG-SM-G900A using TapatalkSame as everybody else...350 small block, double hump heads, 3/4 cam
-
02-11-2018, 09:48 PM #9LTX Member
- Status
- Offline
- Join Date
- Oct 2014
- Name
- Justin
- Vehicle
- 1995 Formula
- Location
- Houston, TX
- Posts
- 82
what are the cam specs?
95 Cyber Grey Formula
396 M6
LE 244/252 .636/.636 110
LE 215cc Trickflows
-
02-12-2018, 12:32 AM #10LTX Master
- Status
- Offline
- Join Date
- Nov 2008
- Name
- Enrique
- Vehicle
- 93 Z28
- Location
- Houston/Clear Lake
- Posts
- 615
With that compression those are real good numbers!
93 Z28, 383, PI 3200, Strange 12 bolt, 3.73, Strange coilovers, suspension, and going 24X... for three years or so.
Bookmarks