Become a ltxtech.com member, Click here to register!
CPT

Results 1 to 4 of 4

Thread: Dissassembly

  1. #1
    Lurker


    Status
    Offline
    Join Date
    Jul 2013
    Vehicle
    95 Firehawk
    Location
    Indiana
    Posts
    58

    Default Dissassembly

    Taking apart my 96 formula parts car. Dash is almost ready to remove.
    Anyone know if there are any places that the main harness might disassemble at the doors, or at the firewall? Not seeing anyplace that it might come apart to make removal easier. Was hoping to leave the door harnesses attached to the doors, but if not possible, I will remove them the hard way.

    Thanks for any advice.

  2. #2
    LTX Regular


    Status
    Offline
    Join Date
    Aug 2013
    Name
    Gary
    Vehicle
    1998 Trans Am
    Location
    Florida
    Posts
    241

    Default

    No, the door harnesses are part of the main interior harness. But you can unplug everything inside the door and slide the bundle out the hole in the door jamb. That's what I had to do when I removed and repaired a crack in my door. Took about 10 minutes to get all the wires out and maybe 15 to put them back.

    1998 Trans Am - LS1/A4 - all stock and almost all original - one owner - driven daily.
    Author of Scan9495, free pc apps 93-95 LT1,94/95 L32: http://ltxtech.com/forums/showthread...light=scan9495

  3. The Following User Says Thank You to GaryDoug For This Post:


  4. #3
    Lurker


    Status
    Offline
    Join Date
    Jul 2013
    Vehicle
    95 Firehawk
    Location
    Indiana
    Posts
    58

    Default

    That is what I thought. Was just hoping I was missing something.

    Now about the harness through the firewall. Will that connection come apart?

  5. #4
    Lurker


    Status
    Offline
    Join Date
    Jul 2013
    Vehicle
    95 Firehawk
    Location
    Indiana
    Posts
    58

    Default

    Posting just in case anyone else runs into this.
    On the 96, I unplugged everything from the BCM and was able to pull the few conectors through the firewall that connect to the front harness.

    The door harness connects to both doors and runs up to the mirror for the map lights. Probably not possible to pull without pulling the dash.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •