- Navigation
Results 1 to 3 of 3
Thread: BBK 58mm Throttle Body
-
12-21-2016, 10:35 PM #1
BBK 58mm Throttle Body
I have a BBK 58mm TB that I will not be using. I bought it used, was told it ran flawlessly, but I have not run it
The butterfly has been tack welded to eliminate the slop, and there are helicoils in the IAC housing mounts. It also has the copper tube jb-welded into the IAC passage. It will come with the 4 mounting bolts and a new 58mm gasket. Also looks like the TPS sensor is already slotted.
Included is IAC, TPS, IAC housing, generic top plate, all the fasteners, 58mm gasket.
Asking $120 shipped CONUS(edit 12/26/16)
IT WILL NEED GASKETS both the IAC and TB cover gaskets are not there. I can include an AC delco kit for an additional $20. The previous owner used copper paste as gasket material i was going to use the gasket kit I already have. But decided this unit is just too big for me right now.
Feel free to ask any questions
Thanks!
Last edited by 87IROCLT1; 12-26-2016 at 12:51 PM.
-
12-26-2016, 12:51 PM #2
bump for price drop, $120 shipped OBO.
-
12-31-2016, 08:55 AM #3
Bookmarks