- Navigation
Results 1 to 5 of 5
-
08-02-2016, 09:30 PM #1
Nitrous jets from manufacturer to manufacturer
I'm currently running a zex wet kit
I'm keeping the solenoids but changing out the nozzle to a nitous outlet plate.
My question is are jets generally the same?
I know zex and nitous outlet list different numbered jets to say make 150 shot.
Would I be able to use my zex jets with the same numbers as the NO jets or are NO and zex jets different
-
08-02-2016, 10:04 PM #2The Nitrous Outlet Junkie
- Status
- Offline
- Join Date
- Apr 2010
- Name
- Troy
- Vehicle
- 1994 Firebird Formula
- Location
- moore, ok (south okc)
- Posts
- 3,274
Nitrous Outlet / Nitrous Express / zex jets are all interchangeable ... use the jet charts for the noids you have.
but the best is to keep the kit all the same ... and NITROUS OUTLET is the only company i will buy my stuff from. best customer service in the industry and all made in the USA 100%94 Formula "budget build" #thebeaterbird
10.177 @128.31 on a lil 250 shot
350, LT1, carb, LE grind cam, th400, 4k stall, ford 8.8 w/ 4.10s
-
08-03-2016, 12:38 AM #3
match the jets to the part used to inject the mixture...if using a nitrous outlet plate...use the jet #'s dictated by the plate as the tune start point
1994 Formula, 396cid, AFR 227's, Single plane, and 2 of the big ones.
-
08-03-2016, 09:43 AM #4
-
08-03-2016, 06:44 PM #5The Nitrous Outlet Junkie
- Status
- Offline
- Join Date
- Apr 2010
- Name
- Troy
- Vehicle
- 1994 Firebird Formula
- Location
- moore, ok (south okc)
- Posts
- 3,274
i thought the orifice of the noids played a major factor in flow to the jets then the jets metered flow out of the plate or nozzle
94 Formula "budget build" #thebeaterbird
10.177 @128.31 on a lil 250 shot
350, LT1, carb, LE grind cam, th400, 4k stall, ford 8.8 w/ 4.10s
Bookmarks