- Navigation
Results 1 to 10 of 45
-
01-05-2016, 11:27 PM #1Xtreme Member
- Status
- Offline
- Join Date
- Dec 2011
- Name
- JeremY
- Vehicle
- 1972 NovA
- Location
- Elsberry, MO
- Posts
- 4,416
*** JCz Nova - 1972 LTX Nova - Project: Nova II ***
Here begins the build thread. The project name is kind of a play on the earlier generations of Novas being "Chevy II's." With everyone calling there second go around "2.0" it seemed more original and rolls off the tongue.
Certified Performance introduced the project over HERE, and they now have it into a roller status. This makes it easier to move around while my wish list and parts lists are all ironed out.
Now we begin the journey, that is planned to be completed in time for the 2016 LTX Shootout. Barring anything catastrophic, physically or financially, this goal seems very realistic. That being said, here.... we..... GO!!!
After many trials, tribulations and having to get the right body shop and enough funds together, we are now on track for the 2018 LTX Shootout. BE THERE!
Part of the ingredients to make a "Hot Ride" is: (1) Part - HOT MESS, so here it is.
The stock, ugly, heavy, crying for some Certified Performance attention, front end:
Let's not forget where the body shop had to cut off BOTH, yes BOTH roofs skins as the previous owner figured slap the new one on top and weld them together:
Last edited by JCzNova; 03-09-2018 at 03:32 PM.
-
-
01-06-2016, 11:26 AM #2Long Live the Opti
- Status
- Offline
- Join Date
- Sep 2008
- Name
- Sean
- Vehicle
- 1999 Twin Turbo Corvette
- Location
- Fort Wayne, IN
- Posts
- 12,072
-
01-06-2016, 09:07 PM #3Xtreme Member
- Status
- Offline
- Join Date
- Dec 2011
- Name
- JeremY
- Vehicle
- 1972 NovA
- Location
- Elsberry, MO
- Posts
- 4,416
-
-
03-03-2016, 05:19 AM #4"The Rock"
- Status
- Offline
- Join Date
- Jul 2009
- Name
- Popo
- Vehicle
- 1996 Impala with the heart of the old camaro. 1993 Corvette..
- Location
- Shillington, Pennsylvania, United States
- Posts
- 61,345
Any updates here???
LTXtech.com IS my drug...
OWNER/ADMIN
Our BIG MOMENT @ the 2012 LTXshootout
http://www.facebook.com/photo.php?v=521756391174175
1996 Camaro Z28: RIP 09/25/2016
1994 Trans Am GT: SOLD 05/2017
1985/1996GS clone: SOLD
1996 Impala SS H/C, LT, with true dual exhaust, 4.10s, lowered, with CPT trans, many cosmetic mods, and a whole lot more to come...
2002 Caddilac EscaladeL CAI, lowered, 6.0 , AWD..
-
03-08-2018, 05:01 PM #5Xtreme Member
- Status
- Offline
- Join Date
- Dec 2011
- Name
- JeremY
- Vehicle
- 1972 NovA
- Location
- Elsberry, MO
- Posts
- 4,416
The body work getting under way with some, media blasting, roof skin install, and some sealer:
Hanging out with the Certified Performance "Shop Truck"
What could have come out of these?!?!
Maybe some tubular control arms and some C5 front brakes:
Add a little power rack & pinion because.... Street & Strip Racecar:
Last edited by JCzNova; 03-09-2018 at 03:34 PM.
-
The Following User Says Thank You to JCzNova For This Post:
-
03-08-2018, 05:02 PM #6Xtreme Member
- Status
- Offline
- Join Date
- Dec 2011
- Name
- JeremY
- Vehicle
- 1972 NovA
- Location
- Elsberry, MO
- Posts
- 4,416
Look at the mass and weight difference there!
The new fuel tank all set up for fuel injection:
Went with some budget friendly front wheels for now, wrapped in MT's. Wasn't sure what final color I was going with paint-wise and wanted to get that ironed out, then choose the final wheels and then figure out the 9" rearend width once I know what wheel sizes I would be purchasing.
Last edited by JCzNova; 03-09-2018 at 03:55 PM.
-
The Following User Says Thank You to JCzNova For This Post:
-
03-08-2018, 05:02 PM #7Xtreme Member
- Status
- Offline
- Join Date
- Dec 2011
- Name
- JeremY
- Vehicle
- 1972 NovA
- Location
- Elsberry, MO
- Posts
- 4,416
Power steering, power brakes and 24x including the stand alone harness from our favorite BP Automotive Bazinga:
Then back to the body shop:
Last edited by JCzNova; 03-09-2018 at 04:21 PM.
-
The Following User Says Thank You to JCzNova For This Post:
-
03-08-2018, 05:03 PM #8Xtreme Member
- Status
- Offline
- Join Date
- Dec 2011
- Name
- JeremY
- Vehicle
- 1972 NovA
- Location
- Elsberry, MO
- Posts
- 4,416
A couple of floor pans inbound:
Last edited by JCzNova; 03-09-2018 at 04:25 PM.
-
The Following User Says Thank You to JCzNova For This Post:
-
03-08-2018, 05:03 PM #9Xtreme Member
- Status
- Offline
- Join Date
- Dec 2011
- Name
- JeremY
- Vehicle
- 1972 NovA
- Location
- Elsberry, MO
- Posts
- 4,416
Sooo, I didn't want to go with the generic cowl hood, and at the same time didn't want to be TOO Street Outlaw. Thus, settled on this "Sunoco" style hood.
Last edited by JCzNova; 03-09-2018 at 04:31 PM.
-
The Following User Says Thank You to JCzNova For This Post:
-
03-08-2018, 05:04 PM #10Xtreme Member
- Status
- Offline
- Join Date
- Dec 2011
- Name
- JeremY
- Vehicle
- 1972 NovA
- Location
- Elsberry, MO
- Posts
- 4,416
She is currently at the body shop and started getting all the panel alignment and primer going. On schedule right now (hopefully not jinxing myself by saying this) to be finished on the body side WITH paint come April 1st. ***More photos to follow as I get them***
Considered a LOT of color options over the last two years of this project, and when it got down to the wire last month of making a decision, I narrowed it down to these two from House of Kolor. Yes, I have chosen one. No, I'm not going to disclose that at this time There is a twist with the color that I chose anyway, so you will see it.... after I do!
THANKS FOR STAYING TUNED ! ! !Last edited by JCzNova; 03-09-2018 at 04:53 PM.
-
The Following 2 Users Say Thank You to JCzNova For This Post:
Bookmarks