- Navigation
Results 1 to 10 of 52
Thread: Clutch Recommendations
Threaded View
-
08-31-2017, 09:54 PM #39
well you could just remove the dust cover and add 2 of the screws that did hold on weight you took off to see if that affects the vibe +/-
if you push in the clutch sustaining at the RPM the vibration happens and it is still there....its motor based. Could certainly be pinon angle to, especially at higher speed, or drive shaft balance, especially stock shaft running 3:73 , 4:10 and lower
usually a engine balance issue is all rpmLast edited by BALLSS; 08-31-2017 at 09:56 PM.
96 BBB 383/T56
Bookmarks