Become a ltxtech.com member, Click here to register!
CPT

Page 1 of 10 12345 ... LastLast
Results 1 to 10 of 100
  1. #1
    LTXTech Sponsor


    Status
    Offline
    Join Date
    Feb 2009
    Name
    David
    Vehicle
    1985 Camaro Z28/1994 Firebird Formula
    Location
    MO
    Posts
    918

    Default 2015 LTx Modified P/A Rules

    Modified P/A

    Qualifying, Ladder, and Tree Information

    Limited to quickest 16 qualifiers. Sportsman Ladder. .400 Pro Tree

    Vehicle/Body Rules

    Open to all year, make, and model vehicles. All vehicles must be stock bodied and stock appearing.
    Minimum race weight including driver 3100lbs.

    Engine & Drivetrain Rules

    Must have LT1 based engine (Factory LT1 Block). Cylinder heads must retain the factory 23 degree valve angle, Trick Flow 21 degree heads permitted (TFS-30400008-M54). Aftermarket heads and converted small block Chevrolet heads will be permitted if they follow the above guidelines.
    Aftermarket EFI PCM and Carburetors are allowed with a 200lbs weight penalty. LS1/24x PCM conversions allowed with 100lbs weight penalty. Gasoline or E85 Only. Rear mounted batteries must be mounted and vented per NHRA specifications and have a functional disconnect switch.
    Any GM transmission allowed. Torque converters not permitted with manual transmissions and clutch activated automatic transmissions are prohibited. Line locks, trans-brakes and two-steps allowed. Throttle stops, delay boxes, and auto shifters prohibited.
    Any automotive rear axle permitted.

    Power Adder

    Nitrous: Maximum number of one stage permitted. Nitrous and fuel solenoids must be visible. Purge must exit engine compartment. NHRA permitted bottle heating only.
    Supercharger: Maximum YSi or F1A. Roots style superchargers limited to 1575 cfm. Supercharger compressor wheel must be constructed of cast or billet aluminum. Exotic materials prohibited.
    Turbo Single: Maximum 88mm inducer and maximum T6 flange. Turbocharger must be of conventional impeller and housing design and type. Turbocharger compressor wheel must be constructed of cast or billet aluminum. Exotic materials prohibited. The tips of the impeller wheel may not be stepped, cut down, or notched to meet impeller tip to tip dimensions. Reducers prohibited
    Turbo Dual: Maximum 60mm inducer and maximum T4 flange. Turbocharger must be of conventional impeller and housing design and type. Turbocharger compressor wheel must be constructed of cast or billet aluminum. Exotic materials prohibited. The tips of the impeller wheel may not be stepped, cut down, or notched to meet impeller tip to tip dimensions. Reducers prohibited.

    Wheels & Tires

    Any automotive wheel permitted. Tires must have a maximum height of 30” and a maximum tread width of 10” for bias-ply and radial tires.

    Class Safety Requirements

    Vehicle and driver must meet NHRA certifications for time and speed the vehicle is running.
    Last edited by DMBlack; 12-16-2014 at 04:00 PM.
    -David-
    1985 Camaro Z28 (Under Construction)
    1994 Firebird Formula - LT1/4L60e (The Daily)

  2. The Following 2 Users Say Thank You to DMBlack For This Post:


  3. #2
    "Project Storm Trooper"


    Status
    Offline
    Join Date
    Sep 2008
    Name
    Tony
    Vehicle
    93 StormTrooper Z28
    Location
    Rapid City, SD
    Posts
    4,810

    Default

    i will assume that the same rules stand for meth/water? seen as a 2ed p/a when used with a FMIC?

    Official Member of $30k Club ​- Work in progress
    1993 Z28- 24x EFI, Clayton Racing 383ci, F1a w/FMIC, AFR 210's, LE Custom cam, LE LT4 Intake/heads, 80# injectors, 255lph/340lph pumps, T56 Conversion, 9" 4.11 w/spool, LPP LT w/Borla, Full UMI suspension....
    1987 Iroc-Z - Stock Summer DD

  4. #3
    The FABRICATOR!


    Status
    Offline
    Join Date
    Jul 2011
    Name
    Chris
    Vehicle
    1985 Monte Carlo SS
    Location
    southern illinois
    Posts
    7,164

    Default

    meth, while it could be viewed as a second power adder, is mostly used for piece of mind in boosted setups, as high octane fuel in a standalone nitrous enrichment fuel tank on nitrous setups is. We want the people that run these setups to have piece of mind to show up on race day
    Chris
    1985 Monte Carlo SS
    Mods: 9:1 383 LT1, Ported Trick Flow heads, D1SC Procharger, 4L80E, 3.50 9"
    Check out the M122 MCSS build thread here!

  5. The Following 3 Users Say Thank You to firebird_1995 For This Post:


  6. #4

    Default

    Sooooooooooo, all teh meth is legal and max timing?

    Lame.
    Correlation does not imply causation.

    Una salus victis nullam sperare salutem

  7. #5
    The FABRICATOR!


    Status
    Offline
    Join Date
    Jul 2011
    Name
    Chris
    Vehicle
    1985 Monte Carlo SS
    Location
    southern illinois
    Posts
    7,164

    Default

    Quote Originally Posted by shownomercy View Post
    Sooooooooooo, all teh meth is legal and max timing?

    Lame.
    If you want to take advantage of the power meth has to offer in being able to run more timing, go for it. I'd personally rather run it and not need it than need it and have it fail. I know you know how much pistons cost.
    Chris
    1985 Monte Carlo SS
    Mods: 9:1 383 LT1, Ported Trick Flow heads, D1SC Procharger, 4L80E, 3.50 9"
    Check out the M122 MCSS build thread here!

  8. #6

    Default

    Quote Originally Posted by firebird_1995 View Post
    If you want to take advantage of the power meth has to offer in being able to run more timing, go for it. I'd personally rather run it and not need it than need it and have it fail. I know you know how much pistons cost.
    I am just being difficult for the sake of it.

    Pending weather, my car will have a nozzle or two spraying. Should go 9s without it though.
    Correlation does not imply causation.

    Una salus victis nullam sperare salutem

  9. The Following User Says Thank You to shownomercy For This Post:


  10. #7
    The FABRICATOR!


    Status
    Offline
    Join Date
    Jul 2011
    Name
    Chris
    Vehicle
    1985 Monte Carlo SS
    Location
    southern illinois
    Posts
    7,164

    Default

    Quote Originally Posted by shownomercy View Post
    I am just being difficult for the sake of it.

    Pending weather, my car will have a nozzle or two spraying. Should go 9s without it though.
    Cool. Looking forward to seeing it on the track!
    Chris
    1985 Monte Carlo SS
    Mods: 9:1 383 LT1, Ported Trick Flow heads, D1SC Procharger, 4L80E, 3.50 9"
    Check out the M122 MCSS build thread here!

  11. The Following User Says Thank You to firebird_1995 For This Post:


  12. #8
    "Project Storm Trooper"


    Status
    Offline
    Join Date
    Sep 2008
    Name
    Tony
    Vehicle
    93 StormTrooper Z28
    Location
    Rapid City, SD
    Posts
    4,810

    Default

    so it looks like i won't get bumped in to outlaw!

    Official Member of $30k Club ​- Work in progress
    1993 Z28- 24x EFI, Clayton Racing 383ci, F1a w/FMIC, AFR 210's, LE Custom cam, LE LT4 Intake/heads, 80# injectors, 255lph/340lph pumps, T56 Conversion, 9" 4.11 w/spool, LPP LT w/Borla, Full UMI suspension....
    1987 Iroc-Z - Stock Summer DD

  13. #9
    The FABRICATOR!


    Status
    Offline
    Join Date
    Jul 2011
    Name
    Chris
    Vehicle
    1985 Monte Carlo SS
    Location
    southern illinois
    Posts
    7,164

    Default

    Quote Originally Posted by CamaroZGuy View Post
    so it looks like i won't get bumped in to outlaw!
    Nope. Now you have to show up. Should be a great year for mod!
    Chris
    1985 Monte Carlo SS
    Mods: 9:1 383 LT1, Ported Trick Flow heads, D1SC Procharger, 4L80E, 3.50 9"
    Check out the M122 MCSS build thread here!

  14. #10

    Default

    LS1 PCM considered "aftermarket"?
    Correlation does not imply causation.

    Una salus victis nullam sperare salutem

Page 1 of 10 12345 ... LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •