Become a ltxtech.com member, Click here to register!
SSS

Page 1 of 3 123 LastLast
Results 1 to 10 of 22
  1. #1
    Overworked/Underpaid


    Status
    Offline
    Join Date
    Aug 2012
    Name
    Peter Alpiger
    Vehicle
    1996 Trans Am WS6; 1994 Corvette [GS Clone]
    Location
    Carrollton, Texas
    Posts
    4,324

    Default Our 94 Corvette free mods - This is the start!

    So yesterday I got the bug to do something and decided to do what few free mods I can do to Monika's Corvette. Decided I'd start with the TB bypass and cutting open the air box lid to let it breathe easier. Looked all around and discovered that nobody around here sells or stocks the damn part I need to couple the 2 hoses together off the TB, so Larry (@popo8) was gracious enough to hook me up with an unused kit he had laying around. Just waiting on that to come in to get it installed, but I did knock out the air box lid. Hopefully Monika doesn't go driving through any deep puddles and waterlock the engine... I also cleaned up the lid since it was out and all nice and dirty. Pics below!

    20130705_204152.jpg20130705_204200.jpg20130705_204211.jpg20130705_204223.jpg20130705_204233.jpg20130705_205819.jpg20130705_205827.jpg20130705_205838.jpg20130705_205844.jpg20130705_205853.jpg20130705_205859.jpg20130705_205907.jpg20130705_205912.jpg20130705_210829.jpg20130705_210847.jpg
    96 Trans Am WS6 LT1 M6: 10/7/11 - current: 245.7 RWHP / 266.2 RWTQ - 14.462s @ 98.28 MPH
    94 Corvette LT1 A4: 4/12/13 - current: No dyno #s yet - 9.547s @ 75.11 MPH (1/8 mile)
    92 Lumina Euro 3.4L LQ1 A4: 1/15/06 - current: The beater car that refuses to die...

  2. #2
    "The Rock"


    Status
    Offline
    Join Date
    Jul 2009
    Name
    Popo
    Vehicle
    1996 Impala with the heart of the old camaro. 1993 Corvette..
    Location
    Shillington, Pennsylvania, United States
    Posts
    61,345

    Default

    That came out very nice man...

    Did u decide if ur gonna do the fro t license plate filler mod?

    Co-Owner/Admin @ LTXtech.com


    Our BIG MOMENT @ the 2012 LTXshootout

    http://www.facebook.com/photo.php?v=521756391174175

    1996 Camaro Z28: RIP 09/25/2016

    1994 Trans Am GT: SOLD 05/2017

    1985/1996GS clone: SOLD

    1996 Impala SS H/C, LT, with true dual exhaust, 4.10s, lowered, with CPT trans, many cosmetic mods, and a whole lot more to come...

    2002 Caddilac EscaladeL CAI, lowered, 6.0 , AWD..





  3. #3
    Overworked/Underpaid


    Status
    Offline
    Join Date
    Aug 2012
    Name
    Peter Alpiger
    Vehicle
    1996 Trans Am WS6; 1994 Corvette [GS Clone]
    Location
    Carrollton, Texas
    Posts
    4,324

    Default

    Quote Originally Posted by popo8 View Post
    That came out very nice man...

    Did u decide if ur gonna do the fro t license plate filler mod?

    Co-Owner/Admin @ LTXtech.com
    Thank you, second time I've played with an angle grinder lol. I'm not gonna mess with the license plate filler, gonna leave the exterior looking nice and clean and stock.

    Sent from my SAMSUNG-SGH-I337 using Xparent Red Tapatalk 2
    96 Trans Am WS6 LT1 M6: 10/7/11 - current: 245.7 RWHP / 266.2 RWTQ - 14.462s @ 98.28 MPH
    94 Corvette LT1 A4: 4/12/13 - current: No dyno #s yet - 9.547s @ 75.11 MPH (1/8 mile)
    92 Lumina Euro 3.4L LQ1 A4: 1/15/06 - current: The beater car that refuses to die...

  4. #4
    "The Rock"


    Status
    Offline
    Join Date
    Jul 2009
    Name
    Popo
    Vehicle
    1996 Impala with the heart of the old camaro. 1993 Corvette..
    Location
    Shillington, Pennsylvania, United States
    Posts
    61,345

    Default

    Quote Originally Posted by Blackbird96WS6 View Post
    Thank you, second time I've played with an angle grinder lol. I'm not gonna mess with the license plate filler, gonna leave the exterior looking nice and clean and stock.

    Sent from my SAMSUNG-SGH-I337 using Xparent Red Tapatalk 2
    Ok... They make a ram air scoup that goes under the nose...

    Co-Owner/Admin @ LTXtech.com


    Our BIG MOMENT @ the 2012 LTXshootout

    http://www.facebook.com/photo.php?v=521756391174175

    1996 Camaro Z28: RIP 09/25/2016

    1994 Trans Am GT: SOLD 05/2017

    1985/1996GS clone: SOLD

    1996 Impala SS H/C, LT, with true dual exhaust, 4.10s, lowered, with CPT trans, many cosmetic mods, and a whole lot more to come...

    2002 Caddilac EscaladeL CAI, lowered, 6.0 , AWD..





  5. #5
    Overworked/Underpaid


    Status
    Offline
    Join Date
    Aug 2012
    Name
    Peter Alpiger
    Vehicle
    1996 Trans Am WS6; 1994 Corvette [GS Clone]
    Location
    Carrollton, Texas
    Posts
    4,324

    Default

    Quote Originally Posted by popo8 View Post
    Ok... They make a ram air scoup that goes under the nose...

    Co-Owner/Admin @ LTXtech.com
    I saw a couple different kits for that, but as dirty as the streets are around here, I'm afraid of what that'd suck up. I already pulled some trash out of the radiator grill when I did the O2s on it.

    Sent from my SAMSUNG-SGH-I337 using Xparent Red Tapatalk 2
    96 Trans Am WS6 LT1 M6: 10/7/11 - current: 245.7 RWHP / 266.2 RWTQ - 14.462s @ 98.28 MPH
    94 Corvette LT1 A4: 4/12/13 - current: No dyno #s yet - 9.547s @ 75.11 MPH (1/8 mile)
    92 Lumina Euro 3.4L LQ1 A4: 1/15/06 - current: The beater car that refuses to die...

  6. #6
    InActive Member


    Status
    Offline
    Join Date
    Oct 2009
    Name
    Stan Wells
    Vehicle
    1997 WS6 Trans Am
    Location
    Alberta, Canada
    Posts
    301

    Default

    I built this for my '87. I traded the car before ever seeing it in action.

    cold air intake vette2.jpg

    1997 WS6 TA, Adj. Panhard, Spohn's F/R adj. tubular LCA's, Edelbrock 3 point front strut tower brace, rear relocation brackets, SFC's, Hooker cat back, full poly kit, 8.5 MSD wires, PCMfor less tune, transgo stage 2 shift kit + + and all the free mods.

  7. #7
    "The Rock"


    Status
    Offline
    Join Date
    Jul 2009
    Name
    Popo
    Vehicle
    1996 Impala with the heart of the old camaro. 1993 Corvette..
    Location
    Shillington, Pennsylvania, United States
    Posts
    61,345

    Default

    Quote Originally Posted by SWells View Post
    I built this for my '87. I traded the car before ever seeing it in action.

    cold air intake vette2.jpg
    Ohhh thats nice.

    Co-Owner/Admin @ LTXtech.com


    Our BIG MOMENT @ the 2012 LTXshootout

    http://www.facebook.com/photo.php?v=521756391174175

    1996 Camaro Z28: RIP 09/25/2016

    1994 Trans Am GT: SOLD 05/2017

    1985/1996GS clone: SOLD

    1996 Impala SS H/C, LT, with true dual exhaust, 4.10s, lowered, with CPT trans, many cosmetic mods, and a whole lot more to come...

    2002 Caddilac EscaladeL CAI, lowered, 6.0 , AWD..





  8. #8
    Overworked/Underpaid


    Status
    Offline
    Join Date
    Aug 2012
    Name
    Peter Alpiger
    Vehicle
    1996 Trans Am WS6; 1994 Corvette [GS Clone]
    Location
    Carrollton, Texas
    Posts
    4,324

    Default

    Quote Originally Posted by SWells View Post
    I built this for my '87. I traded the car before ever seeing it in action.

    cold air intake vette2.jpg
    That is nice! I'm a sucker for twin intakes like that lol.

    Sent from my SAMSUNG-SGH-I337 using Xparent Red Tapatalk 2
    96 Trans Am WS6 LT1 M6: 10/7/11 - current: 245.7 RWHP / 266.2 RWTQ - 14.462s @ 98.28 MPH
    94 Corvette LT1 A4: 4/12/13 - current: No dyno #s yet - 9.547s @ 75.11 MPH (1/8 mile)
    92 Lumina Euro 3.4L LQ1 A4: 1/15/06 - current: The beater car that refuses to die...

  9. #9
    MAD ABOUT LTX's


    Status
    Offline
    Join Date
    Jun 2012
    Name
    Mike
    Vehicle
    1993 Camaro Z/28 A4 2006 Chevrolet Avalanche 1500 1970 Firebird Espirit, 1972 Camaro Sport Coupe
    Location
    Vallejo Ca (SF Bay Area)
    Posts
    1,609

    Default

    I have looked but it seems that both B+M and Hurst do not make shifters for the ZF trans in these cars?
    If you don't stand behind our MIlitary then feel free to stand in front of them. <---- This is my oldest son (PROUD DAD HERE) Mike (just plain mad) Madman337 1993 Camaro Z/28 A4 all stock other than a muffler and LCAs @292K+ miles. 2006 Chevrolet Avalanche. 1970 Pontiac Firebird. 1972 Camaro, 1994 Corvette, ​17 Fusion Sport AWD V6 Twin Turbo

  10. #10
    MAD ABOUT LTX's


    Status
    Offline
    Join Date
    Jun 2012
    Name
    Mike
    Vehicle
    1993 Camaro Z/28 A4 2006 Chevrolet Avalanche 1500 1970 Firebird Espirit, 1972 Camaro Sport Coupe
    Location
    Vallejo Ca (SF Bay Area)
    Posts
    1,609

    Default

    Quote Originally Posted by Madman337 View Post
    I have looked but it seems that both B+M and Hurst do not make shifters for the ZF trans in these cars?

    Ok well I found out that they did at 1 time but no longer do and from what I can see they are both a real pain to put in and the B+M is the preferred 1 to get so does anybody have 1 they no longer want?
    Oh by the way Blackbird, I showed this thread to my Dad and now it is getting done to his C4 so thank you for the nice write up
    If you don't stand behind our MIlitary then feel free to stand in front of them. <---- This is my oldest son (PROUD DAD HERE) Mike (just plain mad) Madman337 1993 Camaro Z/28 A4 all stock other than a muffler and LCAs @292K+ miles. 2006 Chevrolet Avalanche. 1970 Pontiac Firebird. 1972 Camaro, 1994 Corvette, ​17 Fusion Sport AWD V6 Twin Turbo

  11. The Following 2 Users Say Thank You to Madman337 For This Post:


Page 1 of 3 123 LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •