stock head gasket

[dzltek]

Anybody know what the stock thickness is on the head gasket. I'm trying to figure out my compression ratio. I've had .010 off the heads and .007 on the block deck. I think stock gasket is .058. The gaskets I have now are .058 they came with my gasket kit. I'm wanting to get 11:1 or better, but I'm pretty sure I won't get it with theses gaskets. I don't know if I can get close to that or not with thinner gaskets.

[RamAir95TA]

What motor do you have?

You will need to know combustion chamber volume as well to determine your compression.

[SexyTransAm]

cut a shim gaskent to work.

[dzltek]

Sorry, its a 1995 z28 camaro. Stock heads, bore and stroke. I need to get on a computer and do my sig, can't do it on mobile for some reason. Gonna run a cc306 with some port work on the heads. I'm sure ill catch some flack about the stock bore but oh well. Lol

[dzltek]

I figured about 1.3-1.4 cc's have been removed off the heads, and with the heads and block together there's almost 3cc's gone.

[dzltek]

How do i go about figuring out combustion chamber volume?

[RamAir95TA]

http://www.diyporting.com/cc.html

[CamaroZGuy]

Felpro 1074, its a. 039 crushed thickness gasket. And its a good gasket.

Sent from my DROID RAZR using Tapatalk 2

[Ryan Stout]

^what I run. Good gasket esp for the price.

[dzltek]

Thanks for the info.