Become a ltxtech.com member, Click here to register!
SSS

Page 1 of 116 123451151101 ... LastLast
Results 1 to 10 of 1151
  1. #1

    Default Project Rainbow Unicorn 2013

    I let Shownomercyz28 chime in with specifics, but basically he bought one of my used PT88 hotparts that i reworked for him, and will be sending him a complete kit. He will be running a 383ci (single plain intake, he can give details).

    The kit consists of the following:

    Precision T76GTS
    1 5/8" headers (reworked BBK's)
    2.5" crossover
    3" up pipe
    3" downpipe
    JGS 50mm wastegate
    JGS60mm BOV
    31x12x4" A2A IC
    3" cold side piping
    RPS couplers and T-bolt clamps
    oil lines

    Hotside Mockup












    Correlation does not imply causation.

    Una salus victis nullam sperare salutem

  2. #2
    InActive Member


    Status
    Offline
    Join Date
    Sep 2008
    Location
    MA
    Posts
    831

    Default

    Cold side Mockup














    96 TA WS6 - 383ci + T76 = no traction
    www.lt1boost.net ... your home for LTx turbo kits

  3. #3
    Xtreme Member


    Status
    Offline
    Join Date
    Apr 2010
    Name
    Brian DeLuca
    Vehicle
    1997 Trans Am WS6
    Location
    Piscataway, NJ
    Posts
    1,297

    Default

    Looks good and hoping the install goes smooth. I will be giving him a hand so nice to see everything should fit as it should .

    Oh and can you make sure to install something so this makes less than 709 rwhp?

    97 T/A Ram Air Convt - 10.2@140 / 777rwhp - Forever Dyno Queen
    17 Corvette Z06 - 11.05 @ 125
    17 GMC Sierra Denali Dmax

  4. #4
    Long Live the Opti


    Status
    Offline
    Join Date
    Sep 2008
    Name
    Sean
    Vehicle
    1999 Twin Turbo Corvette
    Location
    Fort Wayne, IN
    Posts
    12,072

    Default

    Just keep it under 767 is what I say. Haha

    Sent from my ADR6425LVW using Tapatalk
    Quote Originally Posted by Ryan Stout View Post
    I would try to work my neck muscles but I'm not invited to the LS guy parties.

  5. #5
    InActive Member


    Status
    Offline
    Join Date
    Sep 2008
    Location
    MA
    Posts
    831

    Default

    Quote Originally Posted by blackbirdws6 View Post

    Oh and can you make sure to install something so this makes less than 709 rwhp?
    I'll stuff a shop rag in one side of the crossover
    96 TA WS6 - 383ci + T76 = no traction
    www.lt1boost.net ... your home for LTx turbo kits

  6. #6

    Default

    Unlike you two, it will not be a dyno queen, only goal is a low low 10 sec pass.

  7. #7
    Long Live the Opti


    Status
    Offline
    Join Date
    Sep 2008
    Name
    Sean
    Vehicle
    1999 Twin Turbo Corvette
    Location
    Fort Wayne, IN
    Posts
    12,072

    Default

    Quote Originally Posted by shownomercy View Post
    Unlike you two, it will not be a dyno queen, only goal is a low low 10 sec pass.
    My car has been on the track already thank you very much.

    Sent from my ADR6425LVW using Tapatalk
    Quote Originally Posted by Ryan Stout View Post
    I would try to work my neck muscles but I'm not invited to the LS guy parties.

  8. #8
    Xtreme Member


    Status
    Offline
    Join Date
    Apr 2010
    Name
    Brian DeLuca
    Vehicle
    1997 Trans Am WS6
    Location
    Piscataway, NJ
    Posts
    1,297

    Default

    Same.

    97 T/A Ram Air Convt - 10.2@140 / 777rwhp - Forever Dyno Queen
    17 Corvette Z06 - 11.05 @ 125
    17 GMC Sierra Denali Dmax

  9. #9
    InActive Member


    Status
    Offline
    Join Date
    Sep 2008
    Location
    MA
    Posts
    831

    Default

    Matt, any pics of the intake/TB setup?
    96 TA WS6 - 383ci + T76 = no traction
    www.lt1boost.net ... your home for LTx turbo kits

  10. #10

    Default

    To be honest Jon, you kinda jumped the gun on me, I am no where near getting ready to build this thing. lol

    Its a modified single plane with an edelbrock low profile elbow though.

Page 1 of 116 123451151101 ... LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •