- Navigation
Results 1 to 10 of 1156
Thread: Project Rainbow Unicorn 2013
-
01-06-2012, 10:34 PM #1
Project Rainbow Unicorn 2013
I let Shownomercyz28 chime in with specifics, but basically he bought one of my used PT88 hotparts that i reworked for him, and will be sending him a complete kit. He will be running a 383ci (single plain intake, he can give details).
The kit consists of the following:
Precision T76GTS
1 5/8" headers (reworked BBK's)
2.5" crossover
3" up pipe
3" downpipe
JGS 50mm wastegate
JGS60mm BOV
31x12x4" A2A IC
3" cold side piping
RPS couplers and T-bolt clamps
oil lines
Hotside Mockup
Correlation does not imply causation.
Una salus victis nullam sperare salutem
-
01-06-2012, 10:34 PM #2
Cold side Mockup
96 TA WS6 - 383ci + T76 = no traction
www.lt1boost.net ... your home for LTx turbo kits
-
01-06-2012, 10:45 PM #3Xtreme Member
- Status
- Offline
- Join Date
- Apr 2010
- Name
- Brian DeLuca
- Vehicle
- 1997 Trans Am WS6
- Location
- Piscataway, NJ
- Posts
- 1,297
Looks good and hoping the install goes smooth. I will be giving him a hand so nice to see everything should fit as it should .
Oh and can you make sure to install something so this makes less than 709 rwhp?
97 T/A Ram Air Convt - 10.2@140 / 777rwhp - Forever Dyno Queen
17 Corvette Z06 - 11.05 @ 125
17 GMC Sierra Denali Dmax
-
01-07-2012, 08:07 PM #4Long Live the Opti
- Status
- Offline
- Join Date
- Sep 2008
- Name
- Sean
- Vehicle
- 1999 Twin Turbo Corvette
- Location
- Fort Wayne, IN
- Posts
- 12,072
-
01-07-2012, 09:03 PM #596 TA WS6 - 383ci + T76 = no traction
www.lt1boost.net ... your home for LTx turbo kits
-
01-08-2012, 03:03 PM #6
Unlike you two, it will not be a dyno queen, only goal is a low low 10 sec pass.
-
01-08-2012, 05:54 PM #7Long Live the Opti
- Status
- Offline
- Join Date
- Sep 2008
- Name
- Sean
- Vehicle
- 1999 Twin Turbo Corvette
- Location
- Fort Wayne, IN
- Posts
- 12,072
-
01-08-2012, 08:29 PM #8Xtreme Member
- Status
- Offline
- Join Date
- Apr 2010
- Name
- Brian DeLuca
- Vehicle
- 1997 Trans Am WS6
- Location
- Piscataway, NJ
- Posts
- 1,297
Same.
97 T/A Ram Air Convt - 10.2@140 / 777rwhp - Forever Dyno Queen
17 Corvette Z06 - 11.05 @ 125
17 GMC Sierra Denali Dmax
-
01-09-2012, 09:14 AM #9
Matt, any pics of the intake/TB setup?
96 TA WS6 - 383ci + T76 = no traction
www.lt1boost.net ... your home for LTx turbo kits
-
01-09-2012, 11:14 AM #10
To be honest Jon, you kinda jumped the gun on me, I am no where near getting ready to build this thing. lol
Its a modified single plane with an edelbrock low profile elbow though.
Bookmarks