Become a ltxtech.com member, Click here to register!
SSS

Page 97 of 116 FirstFirst ... 478793949596979899100101107 ... LastLast
Results 961 to 970 of 1156
  1. #961
    Xtreme Member


    Status
    Offline
    Join Date
    Nov 2012
    Name
    Shaun
    Vehicle
    1994 Formula
    Location
    Phillipsburg NJ
    Posts
    7,266
    Supporting Member

    Default

    Quote Originally Posted by shownomercy View Post
    Yea, its gonna be a challenge to get it over the axle. But really want to get it out the back of the car to cut down on interior noise and smell.

    Got a handful of 90* bends and some assorted leftover pie cuts, so should be able to get something done.
    i haz faith you will lol

    Sent from my SM-N975U using Tapatalk
    2021 Charger Scat 392
    1994 Firebird Formula 381 stroker - Carrying the torch! - 9.90 @ 134.3mph on a 200 shot

    The wrench/driver for LTConvert's 94 Z28- Ellwein 383/LE Trickflows/ D1SC / CPT Ultra Pro Race 4L60E
    10.78 @ 125mph. Shooting for 9.99 for Frank Cahall!

  2. #962
    LTX Master


    Status
    Offline
    Join Date
    Dec 2011
    Location
    Louisiana
    Posts
    624

    Default

    FWIW, When I did my 2 1/2" true dual setup I bought a founders offset panhard brace kit and it provides alot more clearance for the pipes coming over the axle. Also a two foot pry bar can be used to massage the heat shield for even more clearance. The sheet metal heat shield bents very easily.
    https://www.foundersperformance.com/...v=f24485ae434a
    '97 SS SLP,T56, Spec stage 2+ clutch,385 stroker,AFR210,XFI292,Moser 12 bolt eaton posi 4.10's. NO traction til top of 3rd gear.
    '57 Chevy 3100 p/u LT1/T56
    Wife's '94 Z28 has been sold.

  3. #963

    Default

    Quote Originally Posted by JOATMON View Post
    FWIW, When I did my 2 1/2" true dual setup I bought a founders offset panhard brace kit and it provides alot more clearance for the pipes coming over the axle. Also a two foot pry bar can be used to massage the heat shield for even more clearance. The sheet metal heat shield bents very easily.
    https://www.foundersperformance.com/...v=f24485ae434a
    No heat shields and no upper brace on car anymore.
    Correlation does not imply causation.

    Una salus victis nullam sperare salutem

  4. The Following User Says Thank You to shownomercy For This Post:


  5. #964

    Default

    More stuff in boxes arrived!
    Correlation does not imply causation.

    Una salus victis nullam sperare salutem

  6. The Following User Says Thank You to shownomercy For This Post:


  7. #965

    Default

    We getting fancy

    Correlation does not imply causation.

    Una salus victis nullam sperare salutem

  8. The Following 2 Users Say Thank You to shownomercy For This Post:


  9. #966
    Xtreme Member


    Status
    Offline
    Join Date
    Nov 2012
    Name
    Shaun
    Vehicle
    1994 Formula
    Location
    Phillipsburg NJ
    Posts
    7,266
    Supporting Member

    Default

    Quote Originally Posted by shownomercy View Post
    We getting fancy

    giggity

    Sent from my SM-N975U using Tapatalk
    2021 Charger Scat 392
    1994 Firebird Formula 381 stroker - Carrying the torch! - 9.90 @ 134.3mph on a 200 shot

    The wrench/driver for LTConvert's 94 Z28- Ellwein 383/LE Trickflows/ D1SC / CPT Ultra Pro Race 4L60E
    10.78 @ 125mph. Shooting for 9.99 for Frank Cahall!

  10. #967

    Default

    Hope to install it this evening if the rain holds off
    Correlation does not imply causation.

    Una salus victis nullam sperare salutem

  11. The Following User Says Thank You to shownomercy For This Post:


  12. #968

    Default

    Correlation does not imply causation.

    Una salus victis nullam sperare salutem

  13. The Following 2 Users Say Thank You to shownomercy For This Post:


  14. #969

    Default

    So after realizing my parents do not have a floor jack, quick trip to chinaland and snagged a HF jack.

    Started the list of small odds & ends, new clear turn signal housings to replace my heavily tinted factories.


    Been messing around with the dash, feel like I am succumbing to way to much data being shown and not enough large gauges for important stuff.


    And on that topic, more sensors. Finally going to log oil temps, and I wanted an ambient air temp sensor to see how IC is doing efficiency wise. Third sensor is a pressure sensor for dome pressure on wastegate. Thats installed and finally can get to ramping in boost.
    Correlation does not imply causation.

    Una salus victis nullam sperare salutem

  15. The Following 2 Users Say Thank You to shownomercy For This Post:


  16. #970
    Lurker


    Status
    Offline
    Join Date
    Sep 2008
    Location
    Little Rock, AR
    Posts
    206

    Default

    Quote Originally Posted by shownomercy View Post
    Hope to install it this evening if the rain holds off
    Did you 3-D print that yourself, or did you buy it? I am considering doing something similar

    97 WS6
    06 Corvette
    05 GMC Sierra

Page 97 of 116 FirstFirst ... 478793949596979899100101107 ... LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •