Looking for this little piece...

**Fixxer99TA** · 06-17-2010, 10:50 AM

DSC00190..jpg DSC00191..jpg

If anyone has one of these little pieces from a set of 1.6 Comp Cams roller tip rockers PN #1418-16 I NEED IT!

Its the piece that goes inside the rocker, mounting it to the stud. The set only comes with Nuts, the Rockers themselves, and these little things so it shouldent be hard to discern which part it is. I havent been able to find it online, though. I will be calling Comp today to see if they can maybe send me one.

Apparently one of them was lost in storage and I need to complete the set (OF COURSE I have 15 and not 16.....). If anyone could sell me one/a bunch/let me know where I can get one seperate that would be MUCH appreciated.

**Chris** · 06-17-2010, 11:05 AM

Comp should be able to send you one, Though summit is very good about that kinda stuff. Once you find the part number for example your 1418-16 That 16 is the count so if you need 18 for extras or only need one just change that last digit.

I also have some 918 beehives and some retainers if you need them. I broke a few springs in the last car and only had a chance to replace a few before selling it

**Fixxer99TA** · 06-17-2010, 01:28 PM

Should be good for now on the springs, I only have the hotcam with the LT4 springs for now. Should be pulling that out in favor of some decent ported heads and a much bigger custom grind, so I might be talking to you eventually if you still have them

You were also right, the part number for the whole set is 1418-16 and one single rocker is 1418-1... Ask me how I know.... I called Comp and they dont sell the rocker trunion (trunnion?) seperate, so I just got one rocker.