- Navigation
Results 1 to 10 of 72
-
03-20-2010, 09:13 AM #1
Tunerpro RT V5 Beta - All in 1 datalogger / tuner
Well I got this up and working guys. To clarify yes it DOES work with LT1's....
No more need to pay for datamaster, or put up with freescans hard to read and clunky interface anymore!
Tunerpro RT V5 is the answer. It's a fully customizable datalogging and tuning solution ALL IN ONE and it's free! Donate if you like is $30 and will remove the 10 sec startup delay screen.
Here's a screen shot of a custom dash board I created to use when tuning. There are some other much cooler ones out there, but this is my first attempt and displays all the data I need for tuning. The built in scaling and display functions are better than Tunercats IMO and I haven't found anything yet that Tunerpro cant do that TC can. If I run across it I can use TC for that one thing, but so far I plan on using Tunerpro from now on.
I'll post a few screen shots actually so you can see some of the new features of V5...
Forgive the quality, uploading them to FB degrades it quite a bit, rest assured the program looks great in person, no fuzzy or hard to read labels, etc...
Instead of attaching them all, here's the link to my FB album:
http://www.facebook.com/photo.php?pi...7&id=572657337
and here's a little video I made up:
Last edited by gregrob; 03-20-2010 at 09:30 AM.
-94 Z28 355 M6 24X E-85 21* TRICKFLOWS TH400 S60
C5 Z06 IN ROAD RACE TRIM. COMING SOON
-
03-20-2010, 09:30 AM #2
Of course this comes out after I get a tune and spend like 300 bucks for JETs DST.
But then again I do need a datalogger...
-
03-20-2010, 09:31 AM #3
This works with obd2 as well?
-
03-20-2010, 10:13 AM #4
all we have to do is give you 30.00 and you will send us a disk to load on a laptop?
New mods coming soon. . .
-
03-20-2010, 10:53 AM #5
-
03-20-2010, 10:54 AM #6
It's not me, Mark Mansur is the man who created it and owns the rights to the software. I'm just a happy user
To answer your question though, theres no disk. You just go to the website www.tunerpro.net and register it if you want to remove the startup screen.
-94 Z28 355 M6 24X E-85 21* TRICKFLOWS TH400 S60
C5 Z06 IN ROAD RACE TRIM. COMING SOON
-
03-20-2010, 12:09 PM #7Pr0jekt Turb0?
- Status
- Offline
- Join Date
- Sep 2008
- Name
- Ryan
- Vehicle
- 1993 Camaro Z28
- Location
- Utica, NY + Jacksonville, FL
- Posts
- 3,605
hm so this does or doesn't work on 93s
-
03-20-2010, 12:25 PM #8
It will work fine with a 93, you just need a burner, or an ostrich emulator.
That's the cool thing about the 93 is you can do real time tuning (emulation) with this program which means you can make actual tuning changes on the fly.
-94 Z28 355 M6 24X E-85 21* TRICKFLOWS TH400 S60
C5 Z06 IN ROAD RACE TRIM. COMING SOON
-
03-20-2010, 12:36 PM #9Pr0jekt Turb0?
- Status
- Offline
- Join Date
- Sep 2008
- Name
- Ryan
- Vehicle
- 1993 Camaro Z28
- Location
- Utica, NY + Jacksonville, FL
- Posts
- 3,605
Yea I have a burner, no ostrich though.
I downloaded it and tried loading some of my bins. It loads fine and most of the info is there but all the data under "functions" like my pe tables and stuff are all valued at 0. It's like it's not loading the entire bin
-
03-20-2010, 12:37 PM #10
Did you load the correct definition file?
-94 Z28 355 M6 24X E-85 21* TRICKFLOWS TH400 S60
C5 Z06 IN ROAD RACE TRIM. COMING SOON
Bookmarks