Looking to buy an off rod y-pipe that will fit pace setter longtubes. thanks.

how much for just heads? thanks

7.73 @87ish with a 1.6x 60 ft. cam only 236/242 on a 110. lift is 550/560. tci 3500 stall, 12 bolt with 4.10s. not sure what the da was but couldnt have been too high. race weight was just under...

PHINES LT1 -1/8th ET=7.73 - 1/8th MPH=87 - 60ft=1.65 - 96 Trans Am - 236/242 .550/.560 110 LSA - 4L60 TCI3600 - Moser 12 bolt 4.10

good job, that is impressive. do you know your 1/8 mph? also what is the raceweight?

had that set-up with first an SLP LM1 resonator. sounded great at idle and WOT, but that was it. Then switched it for a moroso spiral flow. That set-up sounded great, I really liked the sound of...

the release date for those heads keeps getting pushed back. supposedly end of april time frame, but according to AI around 3k for the heads and cam

3" spiral flow

3" only used for 4 1/8th mile passes, and maybe 100 street miles. was clamped to my y-pipe, not welded. $50 shipped OBO

15 cars/trucks
5 motorcycles

that is correct and is the same set-up i went with my cam, although i did not get new rocker studs. i also used the crane 10308 springs. 550/560 lift. stock heads/block

i would not drive much if at all with out the cooler. i am running a trans cooler fro the local auto parts store. it was like 40 bucks or so they aren't very expensive. the bigger the better.

SLP LM resonator, very low miles, good condition, never welded it was clamped onto the y-pipe. very loud, have pics if interested. $55 shipped.

if you are talking about putting it on the end of the y-pipe that what i did. I have the LM shotgun resonator on the end of my y-pipe connected with a clamp. no pipe after the LM. it is oh so loud.

raceweight is right at 3400. 1/8th mile is 7.73 at 87

236/242 110lsa, no dyno numbers, but based on track performance probably around 340rwhp

YouTube - 97 trans am idle with LE cam

the title is misleading, its not an LE cam, although it is a custom grind that i bought...

voted lm1. i have one on the end of my ory and it is retarded loud with a big cam. anybody want to trade for a bullet muffler?

i voted option 1. either way sounds like you want the 847, that cam likes the higher compression, and as long as you are not running around at 6400+ RPM everyday that shortblock should be fine. ...

update: added comp 1.6 pro-mag RR and competition engineering drag shocks in the rear.
60ft. - 1.65
1/8 et - 7.73
1/8mph - 87.03

no cool pics but i got a trailer for the car, new comp engineering drag shocks, and new roller rockers.

bolt-on best was 1.65 60ft. 8.05 @ 82 mph 1/8th mile
added cam removed A/C and HVAC 1.72 60 ft. (spinning) 7.86 @ 86.4 mph 1/8th mile
cam is a 236/242 110lsa, supporting bolt-ons, moser 12bolt with...

Has anybody gone from using a TCI stall to a Yank, PI, or equivalent stall? If so was it worth the swap as in better 60ft and E.T.s? I only race my car so driveability is not a concern. I am...

12.2 not bad for a cam-only budget build.

i did a little research on the procomp rockers and the price was the only thing really going for them. the aluminum rockers are not self-aligning if thats what you are wanting. the cheapest rockers...