Spohn Performance.

https://www.spohn.net/shop/1993-1997-GM-F-Body/Suspension/Sway-Bars-Accessories/Spohn-Pro-Series-Rear-Drag-Sway-Bar.html

Steve Spohn used my car for measurements. We met on...

Have you tried adjusting the pre-load, using the adjustable end links? Should be able to keep it level. The bar is solid 1-5/16" chrome moly spring steel. The end links are bolted and welded to...

I think the "drag" style rear sway bar on the Formula helps keep the car stable. Without it, apply torque, right rear squats. left front comes up, and front end gets "loose".

No problems in central NJ south of New Brunswick..... moderate side-to-side shaking for about 35 seconds. But as west coast pros.... experienced the 6.7 Northridge quake in 1994..... by comparison,...

(Guess I was typing this while you were typing above)

He's posting MAP. Vacuum = MAP - BAR

Assuming 30 "Hg barometer..... 78 - 101.6 = -23.6 kPa = 7.0 "Hg

Using cylinder air mass for timing...

Time flies….. damn!

I'm still following this. When I was looking at the most recent photo of the engine compartment, the only parts I recognized were the fuel pressure regulator and the heater...

Welcome to ltxtech.com ! ! !

Not a lot of LS owners here…. mostly diehard LT1 fanatics. On the other hand, the 24X conversion that rids the LT1 of its Optispark distributor is fairly popular, so...

OK….. I'll butt out and leave this up to the “pros”.

That's what I figured when I posted it.

FYI, from CamaroZ28.com Parts for Sale (only posted yesterday):

https://www.camaroz28.com/forums/parts-sale-14/550-934t-holley-terminator-x-max-mpfi-controller-kit-%241500-889927/

I have no...

Just curious - did Lloyd have any comments on the original exhaust porting? Second Street didn’t like it, claimed the low flow on the bench (less than 70% of intake flow) was due to the bowls being...

Is that going to fit under the hood?

Looks mean as hell.

I think you need to change the key word in the title of this thread from “resurrection” to “reinvention”.

:D

That bottom end is solid…. custom Bill Miller Engineering nitrous pistons, 1,000HP 5.85” Oliver billet rods, not sure what the equivalent Callies crank is today…. Back then the top of the line was...

We might need to look at what to do in the long term.

If I recall correctly, Larry's position was that he would keep the site going until the money runs out. I have no idea what that means. Is...

I originally suggested a plate for the dry nitrous. Second Street said no way, plate cylinder-to-cylinder nitrous distribution was terrible in the LT intake. They moved the nozzles as far forward...

If you burned #7 exhaust valve, should be evident when you pull the head ? ? ? And are the heads still going to LE?

Run lean = run hot, and #7 always gets the worst of it. That’s why the EGT was...

I use Chrome on my Windows laptop, and until today (Friday the 13th) the site was opening normally. Now it's unformatted lists.

I use Safari on my iPad, and everything is still OK.

????????
...

Don’t know about Lou, but looks like the business is alive and well. I think I still have one of his catalogs from ye olde days.

https://www.lgmotorsports.com/

Everybody told me I was going to...

Send LG Motorsports a photo. Bet they never thought their 4-point shock tower brace would serve any other useful purpose :D

Would relo the battery make enough room for the fuel cell? Maybe replace the battery tray/reservoir with a smaller bottle style reservoir.

The PCM checks the voltage on each of the 4 lines I listed. If the voltage isn’t what it’s supposed to be it sets the code. So the cruise control not working could be setting the code. I was...

I looked this one up in the 1996 factory service manual (99% identical to 97). The code is for "VSS Output Circuit". By that it means the PCM VSS data output to the :
- Speedometer
- Cruise...

No need to pick them up right away.

Did you get my email about finding BOTH the QA1 front coil over springs? I thought I ordered 275 #/in springs, but the plastic bag each spring is in shows “OED-315-S”, but I never saw a QA1 315 #...